Cooling System / Radiators

Cooling System / Radiators

Active filters

  • Allstar Dual Pass Aluminium...

    NZ$404.80

    Dual pass radiators circulate coolant across the top half of the radiator, then back across the bottom half, allowing up to twice the heat dissipation. 1-3/4" outlet. The universal inlet design accepts 1-1/2" standard hose, 1-3/4" hose, -16 or -20AN fittings (sold separately).

  • Allstar Over Flow Tank

    NZ$125.45

    Allstar Performance Over Flow Tank 1Qt with Filler and Welded on Bracket

  • Allstar Dry Sump Tank

    NZ$591.00

    Aluminum 6" tanks feature a highly polished finish and a completely removable top to enable thorough cleaning. Three internal baffles are fastened to the top for easy removal and cleaning. All tanks have two 3/8"NPT female ports on the top cover for vent lines or return lines and a 3/8" female NPT bottom port for easy draining. Tanks are offered in two versions, an AN version with a 16AN return fitting and a -12AN supply fitting or an NPT version with two 3/4" NPT female ports for return and one 3/4" NPT female supply port. Mounting brackets must be purchased separately. Capacity listed is fluid filled to approximately 4" from top of tank. 1" of tank height equals approximately 1/2 quart of fluid.

  • Allstar Honeycomb Radiator...

    NZ$46.27

    The 19" x 26" Honey Comb Screen mounts to the front of the radiator to protect from rocks and debris. The screen secures directly to radiator using ALL30085 mounting kit, sold separately.

    Specifications:

    • Radiator Screen Finish: Red
    • Radiator Screen Frame Included: No
    • Radiator Screen Height (in.): 19
    • Radiator Screen Rails Included: No
    • Radiator Screen Width (in.): 26
  • BSC 23.5" x 23.5" x 3.5"...

    NZ$581.62

    Northeast DIRT Modified RadiatorsAll Aluminum, Race ready Big Block capacity Radiators with 1/4 NPT fitting and fan shroud brackets, NO cap.Aluminum Brazed Core. 2 Rows 1.5" Tubes, 11 fins per inch. Direct Drop - in replacement for all Bicknell, PMC, TEO, Troyer and similar Modified Chassis. Complete with Fan shroud mounting tabs. Lightweight 22 lbs. Extremely efficient and easy to clean. Proven successful by top Modified teams. Double Pass Right, Top Right, Bottom Right Radiator 23.5" x 23.5" x 3.5"

  • Moroso Universal Expansion...

    NZ$180.00

    Universal Expansion Tank Fabricated Aluminum Billet filler neck with barbed fitting for overflow hose designed for several application where a 1 1/4 quart remote tank is necessary. One 1/2 NPT female fitting on the bottom of the tank and one 3/8 NPT female fitting on side of the tank. Integral mounting bracket.

  • Stant Radiator Cap 21-25 pound

    NZ$25.45

    Stant Lev-R-Vent style that is Standard SAE “A” size, does include upper gasket.  For use on open and closed cooling systems.

  • Allstar Universal Mounting...

    NZ$13.26

    Mounting kits are commonly used to mount honeycomb screen directly to the radiator. Kits include four 8" nylon mounting bolts with washers, rubber spacer blocks and retaining nuts. Bolts are pressed through the fins of the radiator to mount accessory.

  • Allstar Chevy Single Pass...

    NZ$300.00

    Excellent quality at an affordable price. Filler necks are machined, not stamped, and water tanks are furnace brazed, not epoxied, eliminating two prime sources of leakage. The lightweight 1" tubes, arranged in two rows, offer outstanding cooling in Ford and GM powered race cars, offroad vehicles and street machines. Standard 1-1/2" inlets and 1-3/4" outlets have beaded hose fittings. Width, including tanks, to fit a wide variety of chassis and engine compartment configurations.

  • Allstar Radiator Inlet...

    NZ$35.21

    Inlet fittings thread into Allstar dual and triple pass radiators offering multiple connection options for one radiator. Aluminum fittings have a built-in hex and an o-ring seal.

  • Allstar Ford Single Pass...

    NZ$300.00

    Excellent quality at an affordable price. Filler necks are machined, not stamped, and water tanks are furnace brazed, not epoxied, eliminating two prime sources of leakage. The lightweight 1" tubes, arranged in two rows, offer outstanding cooling in Ford and GM powered race cars, offroad vehicles and street machines. Standard 1-1/2" inlets and 1-3/4" outlets have beaded hose fittings. Width, including tanks, to fit a wide variety of chassis and engine compartment configurations.

  • Allstar Radiator Inlet...

    NZ$35.21

    Inlet fittings thread into Allstar dual and triple pass radiators offering multiple connection options for one radiator. Aluminum fittings have a built-in hex and an o-ring seal.