Brakes

Brakes

Active filters

  • Wilwood Rotor Mounting Hat

    NZ$143.64

    Wilwood's HD Series Fixed Mount Rotor Hats have a long standing reputation for fit, performance, and durability. HD Series hats are manufactured from premium grade aluminum alloys offering high strength, low weight, and show quality appeal. 

  • Allstar Brake Bias Gauge...

    NZ$137.00

    Gauges show actual front and rear line pressure for making brake bias changes before or during the race. Pre-assembled units have 0-1,000 PSI liquid filled gauges with 1/8"NPT male fittings and bleeder valves to evacuate air from the gauges. 2-3/4" x 4-1/2" pre-drilled panel.

  • Motul Racing Brake Fluid

    NZ$33.08

    Extreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 399F(204C).  500ml.

  • Wilwood Steel Balance Bar...

    NZ$80.00

    This balance bar kit includes a steel sleeve to use when fabricating custom steel arm pedals. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable or adjustment knob for quick on-track adjustments.

  • Wilwood Adjustable...

    NZ$80.00

    The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. This adjustment lets you fine tune the front to rear braking balance by proportionally decreasing the rear brake line pressure. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. Standard in and out ports are 1/8-27 NPT.

  • Wilwood Compact Master...

    NZ$125.45

    Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder. The ultra short 3.37”compact body provides 2.16” of additional clearance between the mounting flange and the fluid outlet. A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders. With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air. Enhanced fluid inlet port allows mounting of the standard reservoir included in kit and also contain 11/16-20 internal threads for custom reservoir arrangements. The black E-Coated aluminum body resists corrosion and maintains a durable long lasting finish.

  • Wilwood Forged Dynalite...

    NZ$170.91

    The Forged Billet Dynalite has wide spread application over many forms over motorsports. It serves as the base model in the majority of Wilwood's Bolt-On Disc Brake Kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

  • Wilwood Ultralite Drilled...

    NZ$116.36

    When it comes to rotors, racers are constantly searching for the ultimate balance between the lowest weight and the ability to effectively manage heat. Decreased rotating weight in the drive line provides quicker deceleration under braking and quicker acceleration out of the corners. Lower weight also benefits handling with improved spring and shock control over the unsprung suspension mass. Wilwood's ULD-32 drilled iron rotors provides effective lightweight options for sprints, late models, modifieds, and other competition applications that race in low to medium temperature ranges.

  • Hawk Brake Pads

    NZ$98.61

    Hawk Black Pads are medium torque and easy on rotors. The optimal temperature range is from 100F to 900F. For use on Dirt Late Model, Modifieds and and light weight asphalt cars. Designed to be a good, all-purpose low-cost racing pad. Ferro-CarbonTM is a unique, high-tech friction material developed and manufactured by Hawk Performance for the racing community. All Ferro-CarbonTM materials exhibit non-fade performance and have been evaluated up to and beyond 1, 600 degrees F. Each material offers lower wear rates and higher torque values than all other competitive materials available on the market today.

    Hawk Performance Black Brake Pads - Fits Wilwood Dynalite Caliper, Outlaw 2000, Sierra Mini GN HB100M480.

    4 pads per box.

  • Wilwood Remote Brake Bias...

    NZ$70.91

    Wilwood’s Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special bi-directional detente control providing the driver with positive adjustment feedback. The special five foot cable and housing (which can be cut to any length for a custom fit) provides an optimum bending radius for easy installation and smooth performance in tight confines. The assembly comes with two label faces for either front-to-rear or rear-to-front adjustment. Standard 3/8-24 thread fits Wilwood and most commonly used balance bars.