List of products by brand: Allstar Performance

The key to success in a car building project is access to high quality, reasonably priced parts that get the job done right. Each Allstar part is the result of our dedication to research and development. Once a need is established, parts are designed and manufactured by talented craftsmen, many of whom are racers and hot rodders themselves. Many Allstar Performance parts are one-of-a-kind; you won't find them anywhere else! 

  • Allstar 2 Gauge Panel

    NZ$197.80

    Gauge panels are completely assembled, pre-wired and include lighted mechanical gauges, warning indicator lights with senders to alert you of problems, detailed instructions and installation template. Panel fitted with Allstar gauges measures 4-1/2" Tall x 7-1/4" Long. Gauges: Oil Pressure And Water Temperature

  • Allstar 3 Gauge Panel

    NZ$312.80

    Gauge panels are completely assembled, pre-wired and include lighted mechanical gauges, warning indicator lights with senders to alert you of problems, detailed instructions and installation template. Panel fitted with Allstar gauges measures 4-1/2" Tall x 10-1/2" Long. Gauges: Oil Pressure, Water Temperature and Fuel Temperature

  • Allstar 4 Gauge Panel

    NZ$377.20

    Gauge panels are completely assembled, pre-wired and include lighted mechanical gauges, warning indicator lights with senders to alert you of problems, detailed instructions and installation template. Panel fitted with Allstar gauges measures 4-1/2" Tall x 13-3/4" Long. Gauges: Oil Pressure, Water Temperature, Oil Temperature and Fuel Temperature.

  • Allstar 5" Air Filter Kit...

    NZ$192.00

    Race and dyno proven air cleaners feature a low profile and free flowing design that creates more power over standard flat air cleaner assemblies. Kits include a high flowing dropped base with matching lid and a 1" sure seal spacer with an integrated O-ring for a positive seal on carburetors with a 5-1/8" neck. Kit also includes a pre-oiled washable element 5" in height. The 1" spacer included in this kit places the bottom of the air cleaner base 5/8" below carb neck sealing flange.

  • Allstar Brake Bias Adjuster

    NZ$170.91

    Know exactly where brake adjustments are set, no more guessing the correct setting. When the adjusting knob is turned, the pointer moves along the reference scale. Adjuster body can be pivoted for easy viewing and multiple applications. Record where the pointer is located and use as baseline. Housing, internals, brackets and knob with detent are all made of aluminium. Includes a five foot cable that can be cut to any length for a custom fit and has 3/8"-24 threads for most standard pedal assemblies.

  • Allstar Brake Bias Gauge...

    NZ$137.00

    Gauges show actual front and rear line pressure for making brake bias changes before or during the race. Pre-assembled units have 0-1,000 PSI liquid filled gauges with 1/8"NPT male fittings and bleeder valves to evacuate air from the gauges. 2-3/4" x 4-1/2" pre-drilled panel.

  • Allstar Breather Tank

    NZ$107.27

    Allstar Breather Tank - 1 Bung

  • Allstar Chevy Single Pass...

    NZ$300.00

    Excellent quality at an affordable price. Filler necks are machined, not stamped, and water tanks are furnace brazed, not epoxied, eliminating two prime sources of leakage. The lightweight 1" tubes, arranged in two rows, offer outstanding cooling in Ford and GM powered race cars, offroad vehicles and street machines. Standard 1-1/2" inlets and 1-3/4" outlets have beaded hose fittings. Width, including tanks, to fit a wide variety of chassis and engine compartment configurations.

  • Allstar Dry Sump Tank

    NZ$591.00

    Aluminum 6" tanks feature a highly polished finish and a completely removable top to enable thorough cleaning. Three internal baffles are fastened to the top for easy removal and cleaning. All tanks have two 3/8"NPT female ports on the top cover for vent lines or return lines and a 3/8" female NPT bottom port for easy draining. Tanks are offered in two versions, an AN version with a 16AN return fitting and a -12AN supply fitting or an NPT version with two 3/4" NPT female ports for return and one 3/4" NPT female supply port. Mounting brackets must be purchased separately. Capacity listed is fluid filled to approximately 4" from top of tank. 1" of tank height equals approximately 1/2 quart of fluid.

  • Allstar Dual Pass Aluminium...

    NZ$404.80

    Dual pass radiators circulate coolant across the top half of the radiator, then back across the bottom half, allowing up to twice the heat dissipation. 1-3/4" outlet. The universal inlet design accepts 1-1/2" standard hose, 1-3/4" hose, -16 or -20AN fittings (sold separately).

  • Allstar Ford Single Pass...

    NZ$300.00

    Excellent quality at an affordable price. Filler necks are machined, not stamped, and water tanks are furnace brazed, not epoxied, eliminating two prime sources of leakage. The lightweight 1" tubes, arranged in two rows, offer outstanding cooling in Ford and GM powered race cars, offroad vehicles and street machines. Standard 1-1/2" inlets and 1-3/4" outlets have beaded hose fittings. Width, including tanks, to fit a wide variety of chassis and engine compartment configurations.

  • Allstar Front Stubs

    NZ$225.45

    Allstar Performance Standard Height Spindles Mustang II